Yes, a 24-7/8" leaf spring will work for your 2022 Dutchmen Voltage. If you took the # DX74XR and flattened it out it would measure 26-3/8" which is right in line with what you have. Assuming you have 8,000 lb axles on your toy hauler this would work well as a replacement.
I have attached a link to all of our 24-7/8" long leaf springs for your reference. view full answer...
The 6-Leaf Double-Eye Spring # e64SR is currently our only 7,000lb spring we carry. This has an eye to eye measurement of 24-7/8". Since the springs on your 2012 Dutchman Voltage 3950 are likely sagging over the years of use you will want to measure the length of your spring from the center of the eye to the pin in the center of the leaf spring along the radius. If you come up with 13-3/16" this is going to be the correct spring for you. I recommend replacing your shackle straps and bolts... view full answer...
In order to find the correct leaf springs for your 2012 Dutchman Voltage 3905 you will need to take some measurements and know the capacity of your axle.
What you are looking for is the center of spring eye to center of spring eye measurement. In order to get the most accurate measurement ,the wheels of the trailer should be off the ground since the springs stretch when weight is applied.
I have attached an image showing where you need to measure. If you provide me with this information... view full answer...
We do carry the Aluminum Liger Trailer Wheel - 16" x 6" Rim - 8 on 6-1/2 - Black # LH39FR which has a very similar design to the Leopard. Unfortunately, the Lionshead Aluminum Leopard trailer wheel is no longer available. The Lion would be the best replacement option for your 2012 Dutchmen Voltage 3950. view full answer...
I reached out to Lippert and the correct hub and drum assembly for your Dutchman Voltage 3200 is the Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased # LC53UD. This hub has 1/2" diameter x 1-5/16" long wheel studs. It uses a # 25580 inner and # 14125A outer bearing. This hub and drum is compatible with 12" x 2" brake assemblies like the # 23-180-181. view full answer...
Based on my research your 2013 Dutchmen Voltage 3950 has a Lippert 1621 pin box from the factory. There are a couple 5th Wheel replacement pin boxes with air ride that are compatible replacements.
The Trailair Flex Air 5th Wheel Pin Box - Lippert 1621 - 21,000 lbs # LC369535 is the most popular option that uses a scissor like motion to absorb shock using the air bag and rebound shock. This pin box also has a rubber compound built into the head to absorb that initial road shock before... view full answer...
I spoke to Reese and the zerk fitting on the Goose Box # RP85FR will actually be M6-1.0. This is not the most common size out there, but they should be able to be found at a local hardware store. view full answer...